Diving Communicator

In Australia Phone: (03) 9023 0189

International Phone: +613 9023 0189

In Australia Fax: (03) 9700 0583

International Fax: +613 9700 0583

General Enquiry: info@telecomtest.com.au

Accounts: accounts@telecomtest.com.au

To contact us:

The DI01-2 Diving Communicator Box is designed and manufactured by Link Instruments Ltd. The unit is robustly made in a water proof Peli Case with push button controls which are easily operated even when wearing gloves. The unit uses 2 wires to connect to each diver and has all the features required when controlling one or more commercial divers.

Features:

· Internal (chargeable) or External 12Vdc battery.

· Dual Volume Control for divers and operator.

· 5W output power, on 8Ω, Frequency response 40-20,000 Hz maximum.

· Communication: Operator can communicate with one or both divers at all times. Operator directs communication between Diver 1 and Diver 2 and vice versa.

· Remote operation via headset boom mic and talk switch.

· Remote Speaker/Microphone connections.

· Built-in Speaker/Microphone.

· Easy connection to divers communication cord and other ancillaries via 4mm banana socket.

· Low battery warning LED, Green = Ok, Orange = Low Power, Red = Needs re-charging

· Estimated 60 hours listening, 9 hours talk operation from a 2.0Ah battery. Normal use, 30 hours.

2 wire diver connection.

Specifications:

· Case dimensions: 340 x 295 x 152mm

· Weight: approx. 2kg

· Battery Supply: 12V 2 Ah Lead Acid Gel Battery

· Low Battery: Red/amber/Green LED battery charge indicator

· Battery life: 60 hours standby/listen, 9 hours talk time

· Amplification: 5w output power, on 8Ω

Frequency response: 40 – 20,000 Hz

Connections:

· Diver 1 & Diver 2

· External Speaker / Microphone (supervisor)

· External Microphone

· Tape output

· 12 Volt input / output

All in 4mm multi connector (6 supplied with unit)

Water protection:

· Front panel fully water resistant vinyl membrane

· Push button sealed membrane digital controls

* * *

Diving Communicator Charger
UK Voltage
Fully microprocessor controlled charger. Including maintenance charge once fully charged.
Input Voltage 230Vac 50Hz
Output 12V 300mA
Charge time 10 – 11 hours

Universal Voltage
Microprocessor controlled charger. Including maintenance charge once fully charged.
Input Voltage: 90 - 265Vac
Output: 12V 1A
Charge time: 3 – 4 hours

Diving Communications