GAO5856 ADSL, ADSL2, ADSL2+ and RE-ADSL Tester

In Australia Phone: (03) 9023 0189

International Phone: +613 9023 0189

In Australia Fax: (03) 9700 0583

International Fax: +613 9700 0583

General Enquiry: info@telecomtest.com.au

Accounts: accounts@telecomtest.com.au

To contact us:

GAO5856 ADSL, ADSL2, ADSL2+,RE-ADSL Tester is the latest test solution for ADSL / ADSL 2+ installation, maintenance and measurement. This powerful test set provides all test functions you need in the field, such as upstream & downstream rate measurement, error count, DMM, MODEM simulation, PING and Trace testing. By simply plugging the ADSL / ADSL2+ connections into the tester, you will get your result with one push of the "Auto Test" key. With its handheld design and easy-to-use interface, GAO5856 ADSL, ADSL2, ADSL2+, RE-ADSL Tester is the finest tool for all ADSL / ADSL2+ providers and technicians.

ADSL Tester - GAO5856 ADSL, ADSL2, ADSL2+ and RE-ADSL Tester - Basic Functions:

Support ADSL (G.DMT, G.Lite, T1.413) , ADSL2+ (G.992.5), ADSL2 (G.992.3), RE-ADSL (Annex L)

· ADSL line parameter measurement:

* Upstream and downstream practical Bit Rate

* Upstream and downstream Max Bit Rate

* Upstream and downstream SNR Margin (Signal to Noise Ratio)

* Upstream and downstream Line Attenuation

* Upstream and downstream transmit Power

* Upstream and downstream utilize rate

* ADSL line modulate mode, channel, connection status indication: \

* SNR and Character bits allocation (graphic format) under 256/512 DMT

· ADSL statistics error counts:

* Transmit total frames

* Severe Error Frame (SEF)

* Loss of Signal (LOS)

* Loss of Frame (LOF)

* Reed-Solomon Forward Error Corrections

* Cyclic Redundancy Check (CRC) anomalies

* Header Error Check (HEC)

* Out of Cell Delineation (OCD)

* No Cell Delineation (NCD)

* Error Second (ES), Sever Error Second (SES), The number of unavailable seconds(UAS)

* Bite Error (BE)

* Signal Cell (SC), Digital Signal Cell

· Line error:

* Total test Codes

* Line Error Bit

* Bit error rate

· DMM:

* AC, DC voltage

* Loop feeding current

* Round resistance

* Line capacitance

* Line insulation capacitance

* Estimate line distance

· MODEM simulation:

* Substitutes ADSL MODEM, Supports Bridge, PPPoE, PPPoA, MER, IPoA regulation to perform ISP simulation login and verify operational performance of the terminal equipment.

* Real-time display rate and flux

· PING testing:

* WAN PING testing:IP or domain PING testing, statistical percentage of PING packet loss

* LAN PING testing:IP PING testing,determines faultily connected PC and statistical percentage of PING packet loss

· Trace testing:

* Trace IP transmit route

* Display IP route

· Upgradeable software via an integrated RS-232 interface

· Test results uploaded, saved and printed by TestManagerPro Software

 

ADSL Tester - GAO5856 ADSL, ADSL2, ADSL2+ and RE-ADSL Tester - Main Features:

· Automatically fit for the ADSL line standards, real-time display ADSL line connection status

· Handheld design and easy-to-use

· High resolution backlight large LCD

· Automatically start-up the line parameter testing function via the ” Automatic testing” key, display the test result directly.

· Measure line parameter automatically with “Auto Test” key

· Upgrade the embedded chipset via Ethernet interface to meet the development of ADSL standard as well as to make user's investment worth while.

· Built-in Ni-MH rechargeable batteries and smart charger circuit.

· Battery recharged automatically. With Indication of the status of charge and voltage.

· Recharge time less than 2.5 hours.

· Various Voice alarm and LED indications

· Automatic shut off

· Can be charged with automobile cigarette lighter battery adapter

· Histogram analysis

· Light, smart in size and easy to carry around

 

ADSL Tester - GAO5856 ADSL, ADSL2, ADSL2+ and RE-ADSL Tester - Specifications:

Item	Description
Line Connectors	RJ-11,RJ-45,DMM connector
Line Mode	DMT
Downstream Rate	24Mb/s
Upstream Rate	1.2Mb/s
Max Transmit Distance Supported	6.5km
Alarm and Status Indication	ALARM,LAN LINK/CTIVE,WAN LINK,WAN ACTIVE, Battery Voltage low
Line standards Supported	ADSL (G.DMT, G.Lite, T1.413.Issue 2), ITU G.992.3(G.DMT.bis),ITU G.992.4(G.lite.bis), ADSL 2+ (ITU G.992.5), ITU G.992 Annex A, Annex B, Annex C (FBM and DBM), Annex L(RE - ADSL), Annex M (Double UPStream), YDN078-1998;
Encapsulation Supported	PPP over ATM (PPPoA), PPP over Ethernet (PPPoE),MER,BRIDGE
DMM Parameters	AC,DC Voltage (0-400V 1%); Loop feeding current (0-400mA 1%); Loop resistance testing (0-40000Ω 1%); Line Capacitance (0-4000nF 1%); Line insulation resistance (0-40MΩ 2%)
Series Port	RS-232C
Recharge Batteries	5×1.2V AA NiMH batteries, continuous working for over 2 hours
Recharge Time	Embedded smart charger circuit, recharge time less than 2.5 hours
AC Power Adapter	AC adapter,DC12V/1.5A
TestManagerPro Software	WIN2000/ME/XP
Temperature	0C - 50C
Humidity	5% - 95% non-condensing
Dimensions	L×W×H 243mm×90/128mm×60mm
Weight	Approx 700g

ADSL Tester