ST610 Cable Fault Locator can test long run of coaxial and twisted pair cables in telecommunication applications. It utilizes high speed microprocessor and sampling speed of 500 Mega Sample/sec for better resolution and display better wave shapes.

The VOP for each cable depending on the cable dimension is set. A narrow electric pulse of 30 nsec to 3 msec with a fast rise time is sent on the cable that reflects back from the fault point/far end. The distance to the fault is then calculated automatically and displayed in meters.

Key Features and Functions...

· High intelligent test

·  Automatic fault distance location

· Test any type of telecom, coaxial, network or power cables

· High sampling speed and automatic resolution test

· Dead zone test distance is less than 1m

· Low voltage indication

· Auto shut down under idle running condition

· Data storage of up to 20 Test results

· High resolution backlight LCD display

· Self check facility

· Small size, simple operation

· Automatic/ Manual settings for VOP for different types of cables

· Printout facility with Ext. Printer or a PC via RS232 Serial port (Optional)

· Audible alarm when high voltage >50V appears on test leads

· 7.2V rechargeable Li-lon battery 2.2 AH Capacity, Built-in charger Ext. DC Input: 12V

· Fault distance location

· Pulse testing

· Cable line fault testing (break, mix)

· Wave shape comparison

· Testing data record

Technical Specifications...

Measurement range (m)

1~6,000

Resolution (min) (m)

0.2

Accuracy

≤±2%

Impulse width

30ns~3μs

Voltage (V)

24

VOP range (m/μs)

50~300

Measurement range (m)

50,100, 200, 800, 1600, 3000, 6000

Gain modulation range

1~10

Manual measurement dead zone

≤1m

Auto measurement dead zone

≤15m

General specifications

Working temperature (℃)

0~40

Storage temperature (℃)

-10~+70

Liquid crystal lattice

320×240

Weight (kg)

0.9

Dimension (mm)

205x160 x54

Battery

7.2V rechargeable Li+ battery

Battery working duration (h)

12

Low voltage warning

≤6V