T1/E1 Loopback

Check RX/ TX pairs of T1 / E1 circuit cables

In Australia Phone: (03) 9023 0189

International Phone: +613 9023 0189

In Australia Fax: (03) 9700 0583

International Fax: +613 9700 0583

General Enquiry: info@telecomtest.com.au

Accounts: accounts@telecomtest.com.au

To contact us:

T1 / E1 Loopback

Back to SuperLooper™ Line

The T1/E1 Loopback Jack and Plug quickly and easily checks the RX/TX pairs of T1/E1 circuit cables helping a network technician determine if a signal exists or if there are broken or shorted wires within the cabling. It can be plugged directly into a T1/E1 CSU/DSU or can be attached to the end of a network patch cable. If a signal is present, the T1/E1 Loopback Jack and Plug sends the signal back to the source illuminating the port light on the associated T1/E1 equipment.

General
Dimensions:       2.03 X 0.69 X 0.76 (inches)
Weight:              12 grams
Color:                 Army Green
Regulatory:        Compliance CE

Wiring

FROM
RJ-48C Jack

TO
RJ-48C Jack

1

4

2

5

FROM
RJ-45 Plug

TO
RJ-45 Plug

1

4

2

5

$15.00 AUD Inc. 10% GST (Qty Disc. Available)

Home